Brakes making a noise or the pedal not feeling right? We measure pad thickness and rotor condition at your location and tell you what the figures actually show.
Brakes making a noise or the pedal not feeling right? We measure pad thickness and rotor condition at your location and tell you what the figures actually show.
Decade of Experience
Pad thickness and rotor runout measured and shown to you, since no Tennessee inspection is going to flag them for you.
Emergency Brake Services
Immediate brake diagnostics and repairs whenever you need them to keep you moving safely.
1
2
3
Brake work is where guessing costs the most. We measure the friction material and check the rotors for runout and thickness variation, then tell you what the numbers are. If the pads have life left in them, that is what you will be told, and a noise that turns out to be surface rust after a wet spell is not a repair we will invent.
When the numbers show a fault that has gone past wear, such as a sticking caliper or air in the lines, that work is covered on Auto Brake Repair Memphis. Everything else we handle on the braking system is under Brake Shop Memphis TN.
The brake jobs Memphis drivers call 901-401-9868 about most often, and what the visit involves.
Squeal that turns into a grinding noise. Squeal is often the wear indicator doing its job. Grinding usually means the friction material is gone and the backing plate is against the rotor, which takes the rotor with it.
Pedal going soft or sinking. Air in the lines, a leaking caliper or a failing master cylinder all feel similar from the driver’s seat. We check fluid level and condition, then look for a leak at each corner.
Steering wheel shaking under braking. Normally rotor thickness variation rather than a wheel balance problem. We measure rotor thickness against the minimum figure stamped on the hat before deciding between machining and replacement.
1
2
3
4
Schedule your brake repair today, call us at 901-401-9868 for prompt, reliable service.